Spring Wing Soffit Vent

SV Soffit Ventilators are for installation at eaves with a projecting soffit, and must always be used with RV Rafter Ventilators to provide a continuous ventilation path from the roof void to the outside without impairing the weatherproof function of the structure

SV120 Soffit Ventilators are designed for easy installation in existing soffits, but can also be used in new work.

Clear
To ventilate pitched roofs, where the pitch is 15 deg or above. Not to be used below 15 deg or on flat roof.
  • Using template provided cut aperture 270 x 94mm in soffit board.
  • Place one end of the vent into the cut out hole, locating the clip onto the inside face
  • Push the vent along allowing the soffit board to move further under the spring clip
  • The clip at opposite end will now clear the cut out and may be pushed up to inner face
  • Ease the vent back until the rebate is positioned against cut edge of soffit board
  • Can be used with all common soffit board materials
  • Lightweight and durable
  • Quick and easy to install, no special tools requiredred
  • Prevent large insect ingress
  • Independent of rafter spacing
  • Suitable for new roofs and refurbishment
  • Colours to match stained or painted soffit boards

For the Home Owner

  • Ventilation requirements met
  • Standard product installation for roofers

For the Roofer

  • Standard products
  • Products have been designed with the roofer in mind

For the Architect / Professional

  • Ensure roof ventilation requirements are met
  • Using products that are proven to work
  • Standard product installation

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist